RTD Embedded Technologies, Inc. | www.rtd.com 12 LAN17255HRHR User’s Manual
Low when linked at 10 Mbps, blink for activity
Low when linked at 100 Mbps, blink for activity
Low when linked at 1000 Mbps, blink for activity
3.3 volts or ground
Depends on JP1 setting
If JP1 1-2 is shorted these pins will be ground
If JP1 2-3 is shorted these pins will be 3.3 volts
Table 7: CN14 External LED Drive
3.3.6 CN17 POWER CONNECTOR
CN17 is a power connector for standalone operation. The LAN17255HR operates on +5 volts. The pin out of the connector is shown in the
table below.
Table 8: CN17 Power Connector
Facing the connector, the pin assignments are as follows:
3.3.7 CN1 & CN2: PC/104 ISA BUS CONNECTOR
The ISA bus connector is the connection to the system CPU. This connector is used only as a +5V and ground source. The position and pin
assignments are compliant with the PC/104 Specification. (See PC/104 Specifications on page 19).
3.3.8 CN3: PCI-104 PCI BUS CONNECTOR
The PCI connector is the connection to PCI peripheral modules. This connector is used only as a +5V and ground source. The position and
pin assignments are compliant with the PC/104-Plus Specification. (See PC/104 Specifications on page 19).
Commentaires sur ces manuels